Skip to the beginning of the images gallery

Projecta Battery Charger 12v 1.5Ah 4 Stage Automatic AC015

In stock

SKU

AC015

A$79.90

Battery Charger

The new and improved Charge N’ Maintain is perfectly suited to the DIY’er. No fuss options mean you can simply hook them up and the charger will do the rest. Projecta’s Charge N’ Maintain range offers a safe and practical method for charging all your automotive and marine batteries.

Projecta Charge N’ Maintain Chargers are ‘Smart Chargers’. This technology offers switchable charging stages that ensure an accurate and efficient charge for your battery. This allows longer life and better performance for your battery over extended periods of time.

Projecta’s Charge N’ Maintain Smart Chargers communicate with the battery and ascertain its level of charge. This allows the charger to balance its load and optimise its charging methods to ensure charging is stopped when the battery reaches capacity.

FEATURES

Lightweight & Compact
Switch Mode Technology converts 240V power to 12V DC using electric components, unlike traditional chargers with heavy transformers.

Safe & Easy to Use

The Charge N’ Maintain range are spark-free and are protected against accidental reverse connection significantly increasing safety. They are safe to use while the battery is still in the vehicle; simply connect and forget.

Weatherproof

The chargers are IP65 rated ensuring they’re reliably weatherproof.

Easy-to-read Status Indicators

The colour code charge indicators show POWER on, CHARGING and FULLY CHARGED. (AC008/AC015). The LCD screen displays charge information for ease of use. (AC040/AC080).

Adjustable output

Output is adjusted to suit different battery sizes for optimum charging.

Hard-wiring

Inter-changeable fused wiring harness for permanent installation.

Two Year Warranty

Covers defects in material and or workmanship.

SPECIFICATIONS

INPUT (NOMINAL)		220VAC-240VAC, 50-60HZ
INPUT POWER		24.5W
OUTPUT VOLTAGE		12V
OUTPUT CURRENT		1.5A
CHARGING STAGES		4
1. BATTERY HEALTH CHECK		1.5A UP TO 10.0V
1A. STOP CHARGING		If battery voltage has not reached 10.0V within 2 hours Stage 1, stop charging. Set error.
2A. BULK		1.5A to 14.4V
2B. BULK TIMEOUT, DISPLAY F4, STOP CHARGING		22 HOURS ± 10%
3A. ABSORPTION VOLTAGE HOLD FOR 30 MINS TRANSIT TO FLOAT		14.4V
4. FLOAT VOLTAGE MAX VOLTAGE IS 13.5V FOR 2 MIN OR CURRENT <0.3A, THEN OFF FOR 3 MIN. REPEAT		13.5V for 2 mins or <0.3A then 2 mins rest, repeat
BATTERY VOLTAGE DROPS BELOW A SET VOLTAGE RESTARTS BULK		12.0V
IP RATING		IP65