Feronite Rust Converter 250ml Beats Rust FRC

Safety:

• Clean up with water. Remove stains with lemon juice or household bleach.
• Feronite is mildly acidic. Avoid contact with skin and eyes.
• Wash Feronite from skin with soap and water.
• Treat splashes in the eyes by washing immediately with water and eye wash solution.
• If swallowed seek medical advice. Do not induce vomiting.

Cautions:

• Read more details on the bottle before using.
• KEEP OUT OF THE REACH OF CHILDREN.

Preparation:

• Remove oil or grease with solvent or detergent.
• Remove loose or flaky rust and paint by scraper, wire brush, or wet sand blast.
• Wash surface with clean water and leave damp.
• An ideal surface has an overall covering of firmly attached rust. 

Application:

• On heavy rust, if any rust is still visible, wash down and repeat Feronite treatment.
• Mix Feronite thoroughly by shaking or stirring.
• Apply Feronite onto dampened surface preferably with a stiff bristle brush to assist penetration.
• Re-wet the surface with a fine light spray of water after 1/2 to 1 hour, especially if surface is drying quickly in warm weather.
• Surface turns blue-black as Feronite reacts. Allow 24hours for reaction to be completed.

Finishing:

• Feronite will protect the surface for up to 12 weeks before painting.
• Remove any residual black dust by wiping with a wet or dry cloth, or by hosing.
• Allow surface to dry thoroughly.
• Apply first paint coat of zinc chromate or equivalent metal primer, followed by undercoat and top coat.