Metabo AU60111540 Brushless Impact Driver 12v Kit Batteries & Charger Powermaxx AU60111540

INCLUDES

• Brushless Impact Driver
• Battery Pack LIHD 4.0ah x2
• Battery Charger ASC 55
• Case

Metabo Brushless Impact Driver 12v Powermaxx SSD 12 BL 601115890

• Unique Metabo brushless motor for quick work progress and highest efficiency for any application
• The Metabo 12 Volt class - lightweight, yet powerful
• Compact cordless impact wrench for tough applications
• Integrated work light for illumination of the work area
• Robust die cast aluminium gear housing for optimum heat dissipation and durability
• With handy belt hook and bit case which can be fixed either on the right or left side

Characteristics

• Battery voltage12 V
• Max. screw sizeM14
• Max. no-load speed0 - 2500 rpm
• Maximum impact rate4000 bpm
• Maximum torque140 Nm / 105 ft. lbs
• Speed/torque levels2
• Bit retainerHexagon recess 1/4" (6.35 mm)
• Weight (including battery pack)1 kg / 2.2 lbs
• Vibration
• Impact screwdriving19.9 m/s²
• Uncertainty of measurement K2 m/s²
• Noise emission
• Sound pressure level96 dB(A)
• Sound power level (LwA)105 dB(A)
• Uncertainty of measurement K5 dB(A)

INCLUDES

• Belt hook and bit case
• MetaLoc case insert

2x Metabo Battery Pack LIHD 12v 4.0ah Electronic Single Cell Protection 625349000

• LiHD battery packs for ultimate performance and extremely long application with minimal temperature generation
• Ultra M technology: Intelligent battery management for long-lasting battery packs with a 3 year guarantee
• Patented “AIR COOLED“ charging technology
• Permanent Electronic Single Cell Protection (ESCP) when charging, for particularly long life.
• Processor-controlled charge and discharge management
• Capacity display with almost no self-discharge

Metabo Battery Charger ASC 55, 12-36 V, AUS/NZ 627047000

• Monitored charging with microcontroller
• Battery diagnosis
• Charge time approximately 30 minutes at 1.5 Ah
• "AIR COOLED" function
• For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
• For charging all Li-Ion and LiHD slide-on battery packs (12 V - 36 V) with adapted battery pack charging current
• Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
• "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.
• "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.

Characteristics

• Mains voltage 230 - 240 V
• Mains frequency 50 - 60 Hz