Metabo 240V 900W Metal Bevelling Tool KFM 9-3 RF 601751790

Include:

• 2 carbide indexable inserts 45° chamfer (ISO: DCMT 11 T 304)
• 2 Carbide indexable inserts radius R2
• 2 Carbide indexable inserts radius R3
• Guide Stop
• Screwdriver Torx 15
• Bow-type handle
• MetaLoc case

Features:

• Compact metal bevelling tool for 45° chamfers and radii of 2 to 3 mm at visible edges
• Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
• One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
• Slim cutter head with standard carbide indexable inserts and ball-bearing stationary seal ring for working in tubes and in curves
• Guide stop for a uniform finish and high quality of the surface when processing straight sheets
• Metabo Marathon-motor with patented dust protection for long service life
• Thumbwheel controlled Vario-Constamatic (VC)-Full wave electronics ideal for working on materials requiring customised speeds, and at speeds which remain almost constant under load
• Electronic safety shutdown of the motor for safe working in case the tool stops unexpectedly
• Electronic overload protection, soft start and restart protection
• Slim design for ideal handling

Specifications: 

• Characteristics:
  • No-load speed: 4500 - 11500 rpm
  • Rated input power: 900 W
  • Output power: 470 W
  • Type of edges: Chamfer and radius
  • Max. chamfer width 45°: 6 mm / (1/4 ")
  • Max. chamfer height at 45°: 4 mm / (5/32 ")
  • Possible radii: R2 / R3
  • Grading of cutting depth setting: 0.1 mm / (0.00394 ")
  • Curves smallest internal Ø: 13 mm
  • Weight (without power cable): 2.5 kg / 5.5 lbs
  • Cable length: 4 m / (5/32 ")
• Noise emission: 
  • Sound pressure level: 87 dB(A)
  • Sound power level (LwA): 98 dB(A)
  • Uncertainty of measurement K: 3 dB(A)