Makita 18V Brushless 2-Piece Combo Kit DLX2455G

Makita DHP486Z 18V Li-Ion Cordless Brushless Heavy Duty Hammer Driver Drill - Skin Only

The 18V Brushless Hammer Driver Drill (DHP486) provides 141Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on this model been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications.

Features:

• Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity
• Compact overall length only 178mm for use in narrow workspaces
• High powered brushless motor produces 141Nm peak torque
• High durability aluminum gear housing
• Mechanical 2 speed gearing with all metal gear construction

Specifications:

• Voltage: 18V
• Max Drilling Capacities in Wood:
  • Auger Bit: 50mm
  • Self-feeding Bit: 76mm
  • Hole Saw: 152mm
• Max Drilling Capacities in Steel: 13mm
• Max Drilling Capacities in Masonry: 16mm
• No Load Speed: 
  • Hi: 0 - 2100rpm
  • Lo: 0 - 550rpm
• Impact Rate:
  • Hi: 0 - 31500ipm
  • Lo: 0 - 8250ipm
• Max Peak Torque: 141Nm
• Max Tightening Torque: 
  • Hard: 130Nm
  • Soft: 65Nm
• Dimensions (L x W x H): 320mm x 130mm x 205mm
• Weight: 2.1kg

Warranty:

• 3 Years Warranty Covered By Makita Australia

Makita DTD172Z 18V Li-ion Cordless Brushless 4-Stage Impact Driver

Makita has a tradition of innovation in the cordless impact driver  category, and the 18V LXT Brushless 4-Speed Impact Driver (DTD172)  sets new standards. The DTD172 offers users four speeds, as well as  Makita’s exclusive application modes for increased fastening control.  The unique application models use the brushless motor’s electronic  controls to find the best balance of speed and torque for each  application for more efficient fastening. Another precision setting is  Tightening Mode (T-mode), which downshifts and reduces rotation and  impact speed prior to driving the screw into place, and is engineered to  minimize screw thread stripping, screw breakage and damage to work.  The DTD172 delivers industry-leading performance in a compact and  ergonomic design.

Added features include the one-touch 4-speed power selector button  under the chuck, which enables one-handed speed changes, and  reverse rotation auto-stop mode which stops rotation and impact  when the fastener is loosened adequately to help prevent overloosening and dropped fasteners.

Features:

• Slim Tool Body with a re-designed head that is slimmer than the previous  model enabling the tool to have greater access to tight corners or confided spaces
• One Touch Bit Installation has been designed to prevent  the bit from unexpectedly falling off. A more effective mechanism has been  designed increasing the strength of the chuck with out increasing the resistance  required to install a bit
• Enhanced Anvil Holder; material change from needle bearing to ball bearing  provides reduction of bit wobbling. Providing more stability and control when  fastening
• Quick Change Selector; one touch mode selector located above the trigger  allows the user to jump between modes single handed. Quickly changing between  modes improves efficiency as you no longer have to take your hand off the tool
• Light Mode enables the tool to be used as a torch in dark environments. To turn  the light on set the F/R change lever to the neutral position and pull the switch  trigger. To turn off the light pull the trigger again
• 4 Optimised Application Modes; T-mode 1 and 2 for  self drilling screws in both thick and thin sheet metal. Wood mode for fastening  long wood screws. Bolt mode with rotation auto stop for tightening / loosening  bolts
• 4-Speed Power Selection allow the user to adjust the  power, speed and impact rate to suit the fastening application

Specifications:

• Voltage: 18V
• Drive shank: 6.35mm (1/4") Hex
• Max tightening torque:
  • Max: 180Nm
  • Hard: 170Nm
  • Med: 50Nm
  • Soft: 20Nm
• No load speed:
• Max: 0 - 3600rpm
• Hard: 0 - 3200rpm
• Med: 0 - 2100rpm
• Soft: 0 - 1100rpm
• Impact rate:
• Max: 0 - 3800ipm
• Hard: 0 - 3600ipm
• Med: 0 - 2600ipm
• Soft: 0 - 1100ipm
• Max capacity:
• Standard bolt: M5 - M16
• High tensile bolt: M5 - M14
• Length: 114mm
• Weight: 0.9kg

Warranty:

• 3 Years Warranty Covered By Makita Australia

Makita BL1860B-L 6.0Ah Li-ion Cordless Battery with Gauge

The Makita 18V LXT Li-ion 6.0Ah battery, BL1860B-L, charges faster and works longer than standard Li-ion batteries, giving you and your cordless tools unmatched performance and productivity to take on the most demanding applications.

The Makita 6.0Ah battery combines more run time (100% more run time per charge than the Makita BL1830 3.0Ah battery) with a category-leading charge time of only 60 minutes, so it spends more time working and less time sitting on the charger. For added convenience, it also features an L.E.D. charge level indicator to monitor battery charge. The BL1860B-L resists self-discharge so it is ready for use even after long periods of little to no useage.

Features:

• Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
• Up to 100% more run time per charge compared to BL1830
• Fast 60 minute charging time
• Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
• Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
• Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
• Battery resists self-discharge and remains ready for use even after long periods of storage
• Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
• Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
• The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
• If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating

Specifications:

• Voltage: 18V
• Amp hour: 6.0Ah
• Cell type: Lithium-Ion
• Charging time: 60 minutes
• Weight: 0.6kg

Warranty:

• 2 Years Warranty Covered By Makita Australia

Makita DC18RC 18V Li-Ion Cordless Battery Fast Charger

Features:

• Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
• Forced air cooling fan - cools the battery to minimise charging time
• Digital power display identifies the condition of the battery and charging condition

Specifications:

• Voltage: 18V
• Cell capacity: 1.5Ah - 6.0Ah
• Charge Time: 
• 1.5Ah: 15mins
• 3.0Ah: 22mins
• 4.0Ah: 36mins
• 5.0Ah: 45mins
• 6.0Ah: 55mins
• Length: 185mm
• Weight: 0.82kg

Warranty:

• 2 Years Warranty Covered By Makita Australia