Metabo AU68203740 Brushless Nibbler & Shears Cordless Kit 18v Li-Ion

Metabo Cordless Metal Nibbler 18v 1.6 mm/0.0629" NIV 18 LTX BL 1.6 601614850

• Handy, powerful cordless nibblers for effortless cutting of flat and shaped sheets
• Good cornering ability for notches and interior cut-outs of a radius of 40 mm or more
• Fast, tool-free adjustment of cutting direction by up to 360°, in 45° steps
• High feed rate for faster working, thanks to an efficient brushless motor
• Infinitely adjustable cutting speed for individual customisation to the given material and task at hand
• Distortion- and spark-free cutting, without the annoyance of metal dust
• Comfortable handling thanks to low weight, slim grip area and switch located on the top
• Metabo Quick: tool-free quick changing of dies and punches
• Electronic overload protection for long service life
• With chip collection bag to protect against contact corrosion from ejected chips

Characteristics

• Type of battery pack LiHD
• Battery voltage 8 V
• Max. sheet thickness for steel: 400 N/mm² 1.6 mm / 0.0629 "
• Max. sheet thickness for steel: 600 N/mm2 1.2 mm / 0.0472 "
• Max. sheet thickness for steel: 800 N/mm2 0.7 mm / 0.0275 "
• Max. sheet thickness for aluminium: 250 N/mm 22 mm / 0.0787 "
• Strokes in idle 660 - 2360 rpm
• Cutting speed 1.2 - 2.6 m/min // 47.2 - 102.3 inch/min
• Cutting width 5 mm / 0.1968 "
• Starting hole diameter 21 mm / 0.8267 "
• Smallest curve radius 40 mm / 1.5748 "
• Weight (including battery pack) 1.8 kg

Vibration

• Cutting of sheets 8 m/s²
• Uncertainty of measurement K 1.6 m/s²

Noise emission

• Sound pressure level 96 dB(A)
• Sound power level (LwA) 107 dB(A)
• Uncertainty of measurement K 3 dB(A)

Metabo Cordless Metal Shears 18v 1.6 mm/0.0629" SCV 18 LTX BL 1.6 601615850

• Very handy and maneuverable cordless sheet-metal shears for burr-free cutting of sheet metal on site
• Maximum cornering ability, for comfortable cutting of narrow radii from 15 mm
• Faster working, thanks to the efficient brushless motor
• Infinitely adjustable cutting speed for individual customization to the given material and task at hand
• Comfortable handling thanks to low weight, slim grip area and switch located on the top
• Blade spacing can be flexibly adjusted to different sheet thicknesses
• Economical four-way reversible blade, with the highest cut quality
• Maximum safety in every cutting direction, thanks to large hand guard
• Electronic overload protection for long service life

Characteristics

• Type of battery pack LiHD
• Battery voltage 18 V
• Max. sheet thickness for steel: 400 N/mm² 1.6 mm / 0.0629 "
• Max. sheet thickness for steel: 600 N/mm2 1.2 mm / 0.0472 "
• Max. sheet thickness for steel: 800 N/mm2 0.7 mm / 0.0275 "
• Max. sheet thickness for aluminium: 250 N/mm 22 mm / 0.0787 "
• Strokes in idle 1350 - 4840 rpm
• Cutting speed 7 m/min / 275 inch/min
• Starting hole diameter 27 mm / 1.0629 "
• Smallest curve radius 15 mm / 0.5905 "
• Weight (including battery pack) 1.9 kg

Vibration

• Cutting of sheets 7.6 m/s²
• Uncertainty of measurement K 1.5 m/s²

Noise emission

• Sound pressure level 74 dB(A)
• Sound power level (LwA) 85 dB(A)
• Uncertainty of measurement K 3 dB(A)

Metabo Battery Twin Pack 4.0Ah 18v LIHD Lithium Ion Li-Ion 625367000

• LiHD battery packs for ultimate performance and extremely long application with minimal temperature generation
• Ultra M technology: Intelligent battery management for long-lasting battery packs with a 3 year guarantee
• Patented “AIR COOLED“ charging technology
• Permanent Electronic Single Cell Protection (ESCP) when charging, for particularly long life.
• Processor-controlled charge and discharge management
• Capacity display with almost no self-discharge

Metabo Battery Charger ASC 55, 12-36 V, AUS/NZ 627047000

• Monitored charging with microcontroller
• Battery diagnosis
• Charge time approximately 30 minutes at 1.5 Ah
• "AIR COOLED" function
• For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
• For charging all Li-Ion and LiHD slide-on battery packs (12 V - 36 V) with adapted battery pack charging current
• Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
• "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.
• "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.
•  

Characteristics

• Mains voltage 230 - 240 V
• Mains frequency 50 - 60 Hz

Metabo Tool Bag 460mm x 260mm x 280mm SMALL 657006000

• The robust and compact Metabo tool bag
• On the inside of the bag there are three bag compartments with hook and loop straps to take two battery packs and one charger
• On the outside there is a spacious pocket with zipper and two other small pockets on the left and right head with hook and loop closure for quick access
• Comfortable side pads and padded shoulder strap
• Three reflective Metabo logos for optimum visibility on the construction site
• Stable, integrated base plate with strips to protect the bag contents
• Material: water-repellent and tear-proof 600D polyester
• Dimensions (lxwxh): 460 mm x 260 mm x 280 mm