DAB Technopolymer Surface Mount with nXt Controller with RS4E Rainsaver Device Kit RS4E JETCOM82NXT
Technical Specifications
| Brand | Bianco Rainsaver |
| Product Type | Pressure System |
| Suitable For | Clean Water |
| Bar | 4.6 Bar |
| Approval | Approved For Drinking Water |
| Flow Range Category | a. 0 - 99 L/min |
| Flow Rate (L/min) | 80 L/min |
| Hp | 0.8HP |
| kPa | 476kpa |
| Kilo Watts | 0.6 kW |
| Head Range Category | b. 40 - 59 m |
| Max Head (m) | 47m |
| Port Size Inlet | 1" BSPF inlet |
| Port Size Outlet | 1" BSPM outlet |
| Powered | Electric |
| Taps | 6 Taps |
| Volts | 240 V |
| Warranty (months) | 24 Months |
| Watts | 600 W |
Electronic Self Priming Pump with Auto Restart
6 taps, 47m hd, 60L/m
2 Year Rainsaver MK4E Infield Warranty
AS/NZS4020 Approved for Drinking Water
Rainwater to Mains Changeover Device
- Rainsaver MK4E Changeover Device.
- 2 Year Rainsaver MK4E Infield Warranty
- 12V Low voltage Float.
- WaterMark approved for connection to all town water supplies.
- Aesthetically designed and requires no weather proofing.
- IP33
Notes
Pressure Systems calculated at 10 L/m
Warranty
2 Year Rainsaver MK4E Infield Warranty
Approvals
WaterMark Approved
WATERMARK APPROVAL - ATS 5200.477:2006.
The WaterMark Certification Scheme is a mandatory certification scheme for plumbing and drainage products to ensure that plumbing and drainage materials and products are fit for purpose and appropriately authorised for use in plumbing installations.
The Plumbing Code of Australia requires certain plumbing and drainage materials and products to be certified and authorised for use in a plumbing or drainage installation. These materials and products are to be certified through the WaterMark Certification Scheme and listed on the WaterMark Product Database.
In order to achieve Watermark Certification, the subject material or product must:
- be tested by a recognised testing laboratory;
- comply with an approved specification (either a relevant existing standard or an approved WaterMark Technical Specification);
- be manufactured in accordance with an approved Quality Assurance Program; and
- carry a warranty.
Materials and products complying fully with the applicable requirements of the WaterMark Certification Scheme are then eligible to be certified by a WaterMark Conformity Assessment Body (WMCAB) and listed on the WaterMark Product Database.
Certified materials and products are identifiable by the WaterMark trademark, which must be displayed on the material or product upon the granting of a WaterMark Certificate of Conformity.
Read more about WaterMark Approvals
This pump includes the Bianco iCON nXt series of pump controller.
The nXt Controller is designed and tested in Australia to ensure operation in the toughest of environments, combining innovative technology with robust proven architecture to guarantee constant supply of pressurised water when and where you need it the most.
- Digital display gives you a real time indication of system pressure
- Anti-cycle Protection
- Dry run protection with auto restart function that tests for water availability every 24hrs
- Anti-seize function if pump has not operated for last 24 hours
- Controller automatically restarts pump after a power failure
- Easy assembly and removal using push-n-connect fitting with U clip
- Complies to AS/NZ 4020 drinking water standard
- Over pressure protection turns pump off when 10 bar is reached
- Overload protection
| nXt Controller Data | |
|---|---|
| Function | ON/OFF |
| Modes | 1 |
| Size | 1.5Kw |
| Rated Voltage | 220-240V AC |
| Max Amps | 10 |
| Rated Power | 1500w |
| Rating | IP65 |
| Union Size | 1" |
| Start Pressure | 2.2 bar (32PSi) |
| Stop Pressure | on no flow |
| Max Pressure | 10 bar (145PSI) |
| Max Liquid Temp | 40°C |
| Cable to Pump | Plug and Play |
| Flylead for Pump | When sold as control only |
| Power Cable | 10AMP |
| Communication | - |
| Accessories (Sold Separately) | - |
| 1 ¼” Union Kit | |
| Type | Pump |
|---|---|
| MPN | RS4E JETCOM82NXT |
| Manufacturer | DAB Pumps |
14-DAY CHANGE OF MIND RETURNS
If your product is not suitable, House&TradeSupplies accepts returns up to 14 days from delivery date.
Products must be brand new, unused and in original packaging.
“Change of mind” does not apply to sale items, spare parts or “special order” products.
Return shipping is the customer's responsibility
