ITM Mantis 18V Cordless Dual Torch Welding Carriage WA-MANTIS

Specialised welding tractor designed for precise and efficient welding of steel profiles used as reinforcement elements, such as flat bars, angle profiles (L), T-bars, bulb flats, I-beams, H-beams and channels (C-profiles). Allows operation with two torches simultaneously in continuous or intermittent welding mode. Programming function allows the desired welding path to be set by specifying parameters such as weld length, skip length and crater filling at the beginning and end of the welds. 18V DC Lithium-Ion High Density battery (LiHD) ensures extended power availability, even for a whole shift, using the same CAS battery as other cordless machines in the range. Designed for travelling on steel profiles such as flats, angles, I-beams, T-beams, bulb flats and irregularly shaped workpieces with a radius down to 160mm. Dual-sided operation with two torches in continuous or intermittent welding mode. Simple and ergonomic programming of weld patterns and stitch welding parameters. Multifunctional LED display shows travel speed, units, welding settings and diagnostic messages. 18V DC power allows safe use in harsh environments like shipyards that are often wet, metallic and confined. LiHD battery, supported by intelligent battery management, ensures maximum power availability for an extended period. Closed-loop speed control system stabilises travel speed, enabling uniform heat input for consistently high-quality welds. Backed by a 3 year warranty. Voltage: 18V DC, 4.0Ah. Power: 18W. Welding Position, Horizontal (EN ISO 6947 and AWS/ASME): PA/1F/1G, PB/2F. Torch Type: MIG/MAG. Torch Diameter: 16-22mm (5/8-55/64 inch), up to 35mm (1.38 inch) optional. Horizontal Pulling Force: 150N. Cross Slide Adjustment Range: 0-35mm (0-1.38 inch) up/down, left/right. Horizontal Speed: 5-130cm/min. Weight (without battery): 7kg. Brand: ITM. Model: WA-MANTIS.