MULTITOOL PO362 ATTACHMENT ON TM400-150 150MM BENCH GRINDER PO362-150

Combine the robust TM400-150 ITM 150mm Bench Grinder with one of Australia's leading belt grinding attachments PO362.

TM400-150

• Powerful 370W Induction Motor.
• 25mm width grinding wheels
• Cast iron body and base for long lasting performance.
• Vibration absorbing pads on base for smoother running.
• Capacitor Start-Run motor for maximum performance.
• Fully adjustable tool rests for ease of use and maximum user control.
• Large eyes shield for increased user safety.

PO362
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.

• EFFICIENCY - Superior performance and a user friendly, toolless belt change in under 5 seconds.
• VERSATILITY - Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
• ACCURATE TRACKING - The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
• QUALITY CONSTRUCTION - Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
• 3 YEAR WARRANTY - Against faulty materials and workmanship, even when used commercially.

• 36" x 2" (915 x 50mm) belt - 100 Grit
• 7" (178mm) diameter disc - 120 Grit
• 3 1/2" (89mm) diameter rubber contact wheel
• 5 1/2" (140mm) diameter drive wheel

• 36" x 2" (915 x 50mm) belt - 100 Grit
• 7" (178mm) diameter disc - 120 Grit
• 3 1/2" (89mm) diameter rubber contact wheel
• 5 1/2" (140mm) diameter drive wheel