Includes: 

• 3 Carbide indexable inserts Universal
• Screwdriver SW 4 with T-handle
• Open-jawed spanner SW 10
• Open-jawed spanner SW 10
• Side handle
• Side handle
• Metal carry case
• Metal carry case
• Stop roller
• Stop roller
• Screwdriver Torx 15
• Screwdriver Torx 15
• Screwdriver SW 4 with T-handle

Features: 

• Metal bevelling tool for chamfer heights up to 10 mm for weld seam preparation with maximum user safety by virtue of a dead-man switch and brake system
• One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
• Precise setting of the chamfer angle directly via the guide plates
• Universal milling head with three carbide indexable inserts for all chamfer angles from 0-90°
• Controlled working by virtue of large-scale guide plates
• Stop roller to guide along pipes for easy preparation of weld seams
• Front handle for safe and uniform guidance, adjustable without the need for tools
• Metabo Marathon motor with patented dust protection for long service life
• Tacho Constamatic (TC) Full-wave Electronics: fast work progress by means of constant speed under load
• Patented, mechanical brake system stops the router bit within 2 seconds after switching off
• Electronic overload protection, soft start and restart protection
• Protection of the user by virtue of lateral plates for conveying the chips

Specifications:

• Characteristics: 
  • No-load speed: 12500 rpm
  • Rated input power: 1550 W
  • Output power: 840 W
  • Type of edges: Chamfer
  • Max. chamfer width 45°: 14 mm / (9/16 ")
  • Max. chamfer height at 45°: 10 mm / (3/8 ")
  • Grading of cutting depth setting: 0.1 mm
  • Curves smallest outer Ø: 75 mm / (2 15/16 ")
  • Weight (without power cable): 5.1 kg / 11.2 lbs
  • Cable length: 4 m / (157 1/2 ")
• Noise emission:
  • Sound pressure level: 91 dB(A)
  • Sound power level (LwA): 102 dB(A)
  • Uncertainty of measurement K: 3 dB(A)