Millers Falls 500mm Single Tyne Ripper and Pipelayer Kit FIRP500K

A powerful and versatile single tyne ripper for Category 1 three point linkage tractors. The forged and heat-treated scarifier tooth ploughs through hard, dry ground below the tractor's lift pins. Removes the need for manual digging and pushing. The pipelaying attachment lays poly pipe for acreage and farm water projects. The pipelayer can be removed so the implement works as a standalone ripper. Breaks up compacted ground and aerates the soil. Useful for disturbing rabbit warrens. Suits planting tree lines and general land management. Particularly effective on sloping ground where water runoff is a concern. Ripping along the land's contours catches rainwater and increases subsoil moisture for greener pastures in drier months. The chamfered leading edge of the tyne gives a cleaner rip line without tearing up large chunks of grass. The pointed tyne design also reduces the horsepower the tractor needs. The fully welded tyne is reinforced with double clevis slip-in pin linkage points for exceptional strength. The ripper tooth is replaceable and the point is reversible for longer service life. Rugged steel construction with a powder coated finish requires little maintenance. True ripping depth depends on how low your three point hitch can go, so check your hitch before use. Brand: Millers Falls. Model: FIRP500K. Working Depth: Up To 500mm. Reversible Point: 225 x 75 x 16mm. Solid Steel Billet: 150 x 32mm. Pipelayer Pipe Hole Diameter: 60mm. Pipelayer Pipe Nominal Diameter: 50mm. Linkage: Category 1 3 Point Linkage. Recommended Tractor Power: Up To 65HP. Weight: 45kg. Packing Dimensions: 110 x 55 x 65cm. Single Tyne Ripper. Pipelaying Attachment.