MULTITOOL BELT AND DISC GRINDING ATTACHMENT, 1220X100MM, 178MM DISC PO484

Features

• The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.
• EFFICIENCY - Superior performance and a user friendly, toolless belt change in under 5 seconds. VERSATILITY - Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between. ACCURATE TRACKING - The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners. QUALITY CONSTRUCTION - Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating. 3 YEAR WARRANTY - Against faulty materials and workmanship, even when used commercially.
• 48" x 4" wide (1220 x 100mm) belt. 7" (178mm) diameter disc. 3 1/2" (89mm) diameter rubber contact wheel. 5 1/2" (140mm) diameter drive wheel. The 484 suits most popular 8" bench grinders with a screw mounted wheel guard and a minimum of 3/4 HP. Suits shaft sizes of 5/8" and 1/2". A steel bush is supplied to adapt the drive wheel to 1/2". Fitting Kit supplied. NOTE: This is an attachment only.