Features

• Lightweight compact design with next generation SX Drive Technology gives increased power and 2m (6.5ft) drop test durability.
• Extreme performance with unmatched battery life makes the kit essential for any professional workshop and trade professional.
• The 1/2"Dr impact wrench is driven by a powerful brushless motor that delivers 60 impacts per second.
• Only 140mm (5.5") long including the anvil, the 1/2"Dr impact wrench is ultra compact for maximum access in tight spaces.
• A variable speed trigger, 3 forward speeds and 2 reverse modes let the user pick the best speed and torque for the job.
• The 1/2"Dr impact wrench is reversible and has an ergonomic high grip handle for comfortable use.
• Heavy duty brushless motor delivers 850Nm (627ft-lbs) of Bolt Busting Torque to remove even the most stubborn fasteners.
• Load Sense Control with Reverse Auto-stop is a selectable feature that prevents overspin once the fastener has released, which improves control, safety and efficiency.
• A built-in LED light illuminates the work area and gives high visibility in tight access workspaces.
• The brushless motor gives longer run time and durability.
• Kit includes 2x 5.0Ah high quality long life Li-ion battery packs.
• The 3 speed electronic control of the 90° head impact wrench lets the user match speed to the task.
• The compact design with a long 90° head gives access to areas that were previously difficult to reach.
• The 90° head impact wrench is reversible and has a built-in LED light that illuminates the work area.
• An ergonomic high grip handle keeps the 90° head impact wrench comfortable to use.
• The high speed compact 3 mode air blower/vacuum delivers a narrow stream of fast-moving air for targeted debris and dust removal.
• A variable speed trigger and adjustable 3 speed mode selection give the user a higher degree of air speed control and let output be matched to the application.
• The ultra lightweight and compact design improves control and manoeuvrability.
• A built-in LED light illuminates the work area for improved visibility.
• The blower is ideal for cleaning workshops, engine bays, interiors, tools, benches and job sites.
• SX Drive electronic intelligence enables advanced communication between the batteries and tools, giving unmatched levels of performance, protection and productivity.
• The SX Core microprocessors are the core of the SP SX Drive program and give the ultimate charger to battery to tool interface for improved outright performance.
• Microprocessors are embedded in all three components (charger, battery and tool) to give longer run times, charge and discharge protection, intelligent current flow and temperature protection.
• SX Core technology offers more work time, more power, more recharges and ultimately better performing tools.
• The next generation battery system has been redeveloped to give even greater power and performance for automotive, industrial and trade applications.
• The SP SX Drive cordless range is powered by next-gen INR chemistry battery cells.
• INR chemistry combines the safety and low resistance of Manganese with the high energy capacity of Nickel.
• Paired with the SP Tools 3rd generation SX battery management system, these cells deliver world leading battery performance and power.
• The SX Drive batteries give longer run time.
• They also need less charging.
• They deliver power when you need it.
• Stronger coated contacts improve the battery connection.
• The batteries last longer, with more than double the recharges of normal lithium batteries.
• The 12v/18v two port battery charger is a multi function, microprocessor controlled unit with a 9 stage control and protection system.
• Programmable over-charge voltage is part of the charger control system.
• End of charge current control is part of the charger control system.
• Temperature cut-off protects the battery from overheating during charging.
• A safety charging time limit is built into the charger.
• The charger can receive a charge termination signal from the battery.
• Over-charge voltage protection guards the battery against excess voltage.
• Over-charge current protection guards the battery against excess current.
• Short circuit protection is built into the charger.
• Relay control protection is built into the charger.
• The 36 month tool warranty covers manufacturing defects and faulty materials but not overloading, abuse, misuse or normal wear and tear, applies only to tools used for their intended purpose, and is in addition to Australian (Trade Practices Act, state and territory laws) and New Zealand (Fair Trading Act) statutory rights. Faulty tools may be returned to an authorised dealer for repair or replacement at the sole discretion of Austech Industries Pty Ltd.
• The battery pack and charger warranties are 24 months and carry the same coverage, exclusions and statutory rights as the tool warranty.

Specifications

• Brand: SP Tools
• Model: SP83187
• UPC: 9330514106235
• Platform: 18V SX Drive
• 1/2"Dr Impact Wrench Bolt Busting Torque: 850Nm | 627ft-lbs
• 1/2"Dr Impact Wrench Working Torque: 650Nm | 479ft-lbs
• 1/2"Dr Impact Wrench RPM (No Load Speed): 0-1700 / 0-2200 / 0-2700
• 1/2"Dr Impact Wrench BPM (Impact Rate): 0-2200 / 0-2700 / 0-3200
• 1/2"Dr Impact Wrench Capacity (Shank Size): 1/2" (13mm) Square Drive with friction ring
• 1/2"Dr Impact Wrench Weight (Without Battery): 1.49kg | 3.28Lb
• 1/2"Dr Impact Wrench Length (Including Anvil): 140mm | 5.5"
• 1/2"Dr Impact Wrench Impacts Per Second: 60
• 1/2"Dr 90° Head Impact Wrench Working Torque: Forward 120Nm | 88.5ft-lbs / Reverse 160Nm | 118ft-lbs
• 1/2"Dr 90° Head Impact Wrench No-Load Speed: 0-1100 / 0-1450 / 0-1750rpm
• 1/2"Dr 90° Head Impact Wrench Beats Per Minute: 1500 / 2100 / 2600 BPM
• 1/2"Dr 90° Head Impact Wrench Capacity: 1/2"Dr
• 1/2"Dr 90° Head Impact Wrench Weight (Without Battery): 1.25kg | 2.7Lb
• 1/2"Dr 90° Head Impact Wrench Charging Time: 1 hour auto cut-off (±10min)
• High Speed Compact 3 Mode Air Blower/Vacuum No-Load Speed: 0-15,000 / 0-24,000 / 0-32,000rpm
• High Speed Compact 3 Mode Air Blower/Vacuum Maximum Air Speed: 216km/h | 134mph
• High Speed Compact 3 Mode Air Blower/Vacuum Maximum Air Volume: 14.4m³/min | 508CFM
• High Speed Compact 3 Mode Air Blower/Vacuum Speed Modes: 3
• High Speed Compact 3 Mode Air Blower/Vacuum Weight (Without Battery): 0.8kg | 1.76Lb
• Charge Time: 1 hour auto cut-off (±10min)
• Tool Warranty: 36 Months
• Battery Pack Warranty: 24 Months
• Charger Warranty: 24 Months

Includes

• 18V 1/2"Dr Impact Wrench - SX Drive - Skin Only (SP83126BU)
• 18V 1/2"Dr Impact Wrench - 90° Head - SX Drive - Skin Only (SP83122BU)
• 18V High Speed Compact 3 Mode Air Blower/Vacuum - SX Drive - Skin Only (SP83535BU)
• 2x 18V Li-ion Battery Pack - 5.0Ah - SX Drive (SP83995)
• 12v/18v Two Port Battery Charger - SX Drive (SP83895X)