Features

• Features:
• Compact cordless grease gun with 2 settings and high discharge pressure (max. 690 bar) for mobile maintenance of machines and systems
• Clean working thanks to pre-setting the discharge pressure via thumbwheel with 10 settings
• Selection between high pressure and high flow rate depending on the application
• Optimal view during lubrication thanks to LED on the housing and another LED to be fixed at the hose end
• Switch lock for user-friendly working in continuous mode
• 3-way-filling: grease cartridges, containers or direct filling
• Integrated bleeding valve for constant work progress
• Magnet for fixing on metal, practical shoulder strap and long hose with holder for flexible application area

Specifications

• Voltage: 18V
• Flow Rate/Pressures: 100g/min At 10000psi 290g/min at 6000psi
• Barrel Capacity: 450/500g
• Hose Length: 1200mm
• Weight: 4kg
• Warranty:
• 3 Years Warranty Covered By Metabo Australia via registration
• LiHD battery packs for ultimate performance and extremely long application with minimal temperature generation
• Ultra M technology: Intelligent battery management for long-lasting battery packs
• Patented "AIR COOLED" charging technology
• Permanent Electronic Single Cell Protection (ESCP) when charging, for particularly long life
• Processor-controlled charge and discharge management
• Capacity display with almost no self-discharge
• Battery pack voltage: 18V
• Battery pack capacity: 5.5Ah
• Monitored charging with micro controller
• Battery diagnosis
• Charge time approximately 30 minutes at 1.5 Ah
• "AIR COOLED" function
• For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
• For charging all Li-Ion and LiHD slide-on battery packs (12 V - 36 V) with adapted battery pack charging current
• Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
• "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.
• Mains voltage: 230 - 240V
• Mains frequency: 50 - 60Hz